# Python Imports import wx.lib.agw.floatspin as FS from datetime import datetime import re import time from threading import Thread # Local Imports import globals from yamaha import * from helpers import * class SmartVolumeFinished(eg.ActionBase): def __call__(self): globals.smart_vol_up_start = None globals.smart_vol_down_start = None class SmartVolumeUp(eg.ActionBase): def __call__(self, zone, step1, step2, wait): izone = convert_zone_to_int(zone) if globals.smart_vol_up_start is None: globals.smart_vol_up_start = datetime.now() diff = datetime.now() - globals.smart_vol_up_start if diff.seconds < float(wait): #print "Volume Up:", step1 increase_volume(izone, step1) else: #print "Volume Up:", step2 increase_volume(izone, step2) def Configure(self, zone='Active Zone', step1=0.5, step2=2.0, wait=2.0): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.ALL_ZONES_PLUS_ACTIVE) wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) wx.StaticText(panel, label="Increase Amount (Step 1): ", pos=(10, 60)) fs_step1 = FS.FloatSpin(panel, -1, pos=(170, 57), min_val=0.5, max_val=10, increment=0.5, value=float(step1), agwStyle=FS.FS_LEFT) wx.StaticText(panel, label="dB", pos=(270, 60)) fs_step1.SetFormat("%f") fs_step1.SetDigits(1) wx.StaticText(panel, label="Time between Step 1 to Step 2: ", pos=(10, 100)) fs_wait = FS.FloatSpin(panel, -1, pos=(170, 97), min_val=0.5, max_val=999, increment=0.1, value=float(wait), agwStyle=FS.FS_LEFT) wx.StaticText(panel, label="Seconds", pos=(270, 100)) fs_wait.SetFormat("%f") fs_wait.SetDigits(1) wx.StaticText(panel, label="Increase Amount (Step 2): ", pos=(10, 140)) fs_step2 = FS.FloatSpin(panel, -1, pos=(170, 137), min_val=0.5, max_val=10, increment=0.5, value=float(step2), agwStyle=FS.FS_LEFT) wx.StaticText(panel, label="dB", pos=(270, 140)) fs_step2.SetFormat("%f") fs_step2.SetDigits(1) while panel.Affirmed(): panel.SetResult(zones[choice_zone.GetCurrentSelection()], fs_step1.GetValue(), fs_step2.GetValue(), fs_wait.GetValue()) class SmartVolumeDown(eg.ActionBase): def __call__(self, zone, step1, step2, wait): izone = convert_zone_to_int(zone) if globals.smart_vol_down_start is None: globals.smart_vol_down_start = datetime.now() diff = datetime.now() - globals.smart_vol_down_start if diff.seconds < float(wait): decrease_volume(izone, step1) else: decrease_volume(izone, step2) def Configure(self, zone='Active Zone', step1=0.5, step2=2.0, wait=2.0): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.ALL_ZONES_PLUS_ACTIVE) wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) wx.StaticText(panel, label="Decrease Amount (Step 1): ", pos=(10, 60)) fs_step1 = FS.FloatSpin(panel, -1, pos=(170, 57), min_val=0.5, max_val=10, increment=0.5, value=float(step1), agwStyle=FS.FS_LEFT) wx.StaticText(panel, label="dB", pos=(270, 60)) fs_step1.SetFormat("%f") fs_step1.SetDigits(1) wx.StaticText(panel, label="Time between Step 1 to Step 2: ", pos=(10, 100)) fs_wait = FS.FloatSpin(panel, -1, pos=(170, 97), min_val=0.5, max_val=999, increment=0.1, value=float(wait), agwStyle=FS.FS_LEFT) wx.StaticText(panel, label="Seconds", pos=(270, 100)) fs_wait.SetFormat("%f") fs_wait.SetDigits(1) wx.StaticText(panel, label="Decrease Amount (Step 2): ", pos=(10, 140)) fs_step2 = FS.FloatSpin(panel, -1, pos=(170, 137), min_val=0.5, max_val=10, increment=0.5, value=float(step2), agwStyle=FS.FS_LEFT) wx.StaticText(panel, label="dB", pos=(270, 140)) fs_step2.SetFormat("%f") fs_step2.SetDigits(1) while panel.Affirmed(): panel.SetResult(zones[choice_zone.GetCurrentSelection()], fs_step1.GetValue(), fs_step2.GetValue(), fs_wait.GetValue()) class IncreaseVolume(eg.ActionBase): def __call__(self, zone, step): increase_volume(convert_zone_to_int(zone), float(step)) def Configure(self, zone='Active Zone', step=0.5): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.ALL_ZONES_PLUS_ACTIVE) wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) wx.StaticText(panel, label="Increase Amount (Step): ", pos=(10, 60)) floatspin = FS.FloatSpin(panel, -1, pos=(10, 80), min_val=0.5, max_val=10, increment=0.5, value=float(step), agwStyle=FS.FS_LEFT) floatspin.SetFormat("%f") floatspin.SetDigits(1) while panel.Affirmed(): panel.SetResult(zones[choice_zone.GetCurrentSelection()], floatspin.GetValue()) class DecreaseVolume(eg.ActionBase): def __call__(self, zone, step): decrease_volume(convert_zone_to_int(zone), float(step)) def Configure(self, zone='Active Zone', step=0.5): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.ALL_ZONES_PLUS_ACTIVE) wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) wx.StaticText(panel, label="Decrease Amount (Step): ", pos=(10, 60)) floatspin = FS.FloatSpin(panel, -1, pos=(10, 80), min_val=0.5, max_val=10, increment=0.5, value=float(step), agwStyle=FS.FS_LEFT) floatspin.SetFormat("%f") floatspin.SetDigits(1) while panel.Affirmed(): panel.SetResult(zones[choice_zone.GetCurrentSelection()], floatspin.GetValue()) class SetVolume(eg.ActionBase): def __call__(self, zone, vol): set_volume(convert_zone_to_int(zone), float(vol)) def Configure(self, zone='Active Zone', vol=-50.0): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.ALL_ZONES_PLUS_ACTIVE) wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) wx.StaticText(panel, label="Exact Volume (dB): ", pos=(10, 60)) floatspin = FS.FloatSpin(panel, -1, pos=(10, 80), min_val=-100.0, max_val=50.0, increment=0.5, value=float(vol), agwStyle=FS.FS_LEFT) floatspin.SetFormat("%f") floatspin.SetDigits(1) while panel.Affirmed(): panel.SetResult(zones[choice_zone.GetCurrentSelection()], floatspin.GetValue()) class SetActiveZone(eg.ActionBase): def __call__(self, zone): set_active_zone(convert_zone_to_int(zone)) def Configure(self, zone='Main Zone'): panel = eg.ConfigPanel() zones = get_available_zones(False, globals.ALL_ZONES) # Don't include active zone! wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) while panel.Affirmed(): panel.SetResult(zones[choice_zone.GetCurrentSelection()]) class SetScene(eg.ActionBase): def __call__(self, scene): set_scene(int(scene)) def Configure(self, scene=1): panel = eg.ConfigPanel() wx.StaticText(panel, label="Scene Number: ", pos=(10, 10)) spin = wx.SpinCtrl(panel, -1, "", (10, 30), (80, -1)) spin.SetRange(1,12) spin.SetValue(int(scene)) while panel.Affirmed(): panel.SetResult(spin.GetValue()) class SetSourceInput(eg.ActionBase): def __call__(self, zone, source): izone = convert_zone_to_int(zone) change_source(source, izone) def Configure(self, zone="Active Zone", source="HDMI1"): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.ALL_ZONES_PLUS_ACTIVE) wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) inputs = globals.ALL_SOURCES wx.StaticText(panel, label="Source Input: ", pos=(10, 60)) choice_input = wx.Choice(panel, -1, (10, 80), choices=inputs) if source in inputs: choice_input.SetStringSelection(source) while panel.Affirmed(): panel.SetResult(zones[choice_zone.GetCurrentSelection()], inputs[choice_input.GetCurrentSelection()]) class SetPowerStatus(eg.ActionBase): def __call__(self, zone, status): izone = convert_zone_to_int(zone) if status == 'Toggle On/Standby': toggle_on_standby(izone) elif status == 'On': power_on(izone) elif status == 'Standby': power_standby(izone) def Configure(self, zone="Active Zone", status="Toggle On/Standby"): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.ALL_ZONES_PLUS_ACTIVE) wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) statuses = [ 'Toggle On/Standby', 'On', 'Standby' ] wx.StaticText(panel, label="Power Status: ", pos=(10, 60)) choice = wx.Choice(panel, -1, (10, 80), choices=statuses) if status in statuses: choice.SetStringSelection(status) while panel.Affirmed(): panel.SetResult(zones[choice_zone.GetCurrentSelection()], statuses[choice.GetCurrentSelection()]) class SetSleepStatus(eg.ActionBase): def __call__(self, zone, status): izone = convert_zone_to_int(zone) set_sleep(status, izone) def Configure(self, zone="Active Zone", status="Off"): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.ALL_ZONES_PLUS_ACTIVE) wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) statuses = [ 'Off', '30 min', '60 min', '90 min', '120 min', 'Last' ] wx.StaticText(panel, label="Sleep Status: ", pos=(10, 60)) choice = wx.Choice(panel, -1, (10, 80), choices=statuses) if status in statuses: choice.SetStringSelection(status) while panel.Affirmed(): panel.SetResult(zones[choice_zone.GetCurrentSelection()], statuses[choice.GetCurrentSelection()]) class SetSurroundMode(eg.ActionBase): def __call__(self, mode): if mode == 'Toggle Straight/Surround Decode': toggle_straight_decode() elif mode == 'Straight': straight() elif mode == 'Surround Decode': surround_decode() def Configure(self, mode='Toggle Straight/Surround Decode'): panel = eg.ConfigPanel() modes = [ 'Toggle Straight/Surround Decode', 'Straight', 'Surround Decode' ] wx.StaticText(panel, label="Surround Mode: ", pos=(10, 10)) choice = wx.Choice(panel, -1, (10, 30), choices=modes) if mode in modes: choice.SetStringSelection(mode) while panel.Affirmed(): panel.SetResult(modes[choice.GetCurrentSelection()]) class Set7ChannelMode(eg.ActionBase): # McB 1/11/2014 - Turn 7-channel mode on and off def __call__(self, mode): if mode == 'On': channel7_on() elif mode == 'Off': channel7_off() def Configure(self, mode='On'): panel = eg.ConfigPanel() modes = [ 'On', 'Off' ] wx.StaticText(panel, label="7-Channel Mode: ", pos=(10, 10)) choice = wx.Choice(panel, -1, (10, 30), choices=modes) if mode in modes: choice.SetStringSelection(mode) while panel.Affirmed(): panel.SetResult(modes[choice.GetCurrentSelection()]) class CursorAction(eg.ActionBase): def __call__(self, action, zone): code = None izone = convert_zone_to_int(zone, convert_active=True) if izone in [0,1]: code = globals.CURSOR_CODES[1][action] if izone == 2: # Not all of the actions are supported for zone 2 code = globals.CURSOR_CODES[2].get(action, None) if code is not None: send_code(code) else: # It is possible the user's active zone is not yet supported eg.PrintError("Zone {0} is not yet supported for this action".format(izone if izone > -1 else chr(-1 * izone))) def Configure(self, action="Up", zone="Active Zone"): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.TWO_ZONES_PLUS_ACTIVE, limit=2) actions = globals.CURSOR_CODES[1].keys() wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) wx.StaticText(panel, label="Cursor Action: ", pos=(10, 60)) choice_action = wx.Choice(panel, -1, (10, 80), choices=actions) if action in actions: choice_action.SetStringSelection(action) while panel.Affirmed(): panel.SetResult(actions[choice_action.GetCurrentSelection()], zones[choice_zone.GetCurrentSelection()]) class OperationAction(eg.ActionBase): def __call__(self, action, zone): code = None izone = convert_zone_to_int(zone, convert_active=True) if izone in [0,1]: code = globals.OPERATION_CODES[1][action] if izone == 2: code = globals.OPERATION_CODES[2][action] if code is not None: send_code(code) else: # It is possible the user's active zone is not yet supported eg.PrintError("Zone {0} is not yet supported for this action".format(izone if izone > -1 else chr(-1 * izone))) def Configure(self, action="Play", zone="Active Zone"): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.TWO_ZONES_PLUS_ACTIVE, limit=2) actions = globals.OPERATION_CODES[1].keys() wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) wx.StaticText(panel, label="Operation: ", pos=(10, 60)) choice_action = wx.Choice(panel, -1, (10, 80), choices=actions) if action in actions: choice_action.SetStringSelection(action) while panel.Affirmed(): panel.SetResult(actions[choice_action.GetCurrentSelection()], zones[choice_zone.GetCurrentSelection()]) class NumCharAction(eg.ActionBase): def __call__(self, action, zone): code = None izone = convert_zone_to_int(zone, convert_active=True) if izone in [0,1]: code = globals.NUMCHAR_CODES[1][action] if izone == 2: code = globals.NUMCHAR_CODES[2][action] if code is not None: send_code(code) else: # It is possible the user's active zone is not yet supported eg.PrintError("Zone {0} is not yet supported for this action".format(izone if izone > -1 else chr(-1 * izone))) def Configure(self, action="1", zone="Main Zone"): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.TWO_ZONES_PLUS_ACTIVE, limit=2) actions = sorted(globals.NUMCHAR_CODES[1].keys(), key=lambda k: int(k) if len(k) == 1 else 10 + len(k)) wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (10, 30), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) wx.StaticText(panel, label="Action: ", pos=(10, 60)) choice_action = wx.Choice(panel, -1, (10, 80), choices=actions) if action in actions: choice_action.SetStringSelection(action) while panel.Affirmed(): panel.SetResult(actions[choice_action.GetCurrentSelection()], zones[choice_zone.GetCurrentSelection()]) class GetInfo(eg.ActionBase): def __call__(self, object, cat): zone = None #zone specific objects if object == "Input Selection": object = "Input_Sel" if object == "Scene": return "not complete" if object == "Sound Program": object = "Sound_Program" if cat == "Main Zone": zone = 1 if cat.startswith("Zone"): zone = convert_zone_to_int(cat) if object == "Volume Level": val, unit = get_status_strings(["Val", "Unit"], zone) return "{0} {1}".format(float(val) / 10.0, unit) if zone is not None: return get_status_string(object,zone) #all the rest are zone agnostic #object, input, location to get_device_string section = "List_Info" if object in ["Menu Layer", "Menu Name", "Current Line", "Max Line"] \ or object in ['Line {0}'.format(i) for i in range(9)]: object = object.replace(' ', '_') else: section = "Play_Info" if object == "FM Mode": object = "FM_Mode" elif object == "Frequency": try: val, unit, band, exp = get_device_strings(["Val", "Unit", "Band", "Exp"], cat, section) if int(exp) == 0: real_val = int(val) else: real_val = float(val) / pow(10, int(exp)) return "{0} {1}".format(real_val, unit) except: eg.PrintError("Input not active or unavailable with your model.") return None elif object == "Audio Mode": object = "Current" elif object == "Antenna Strength": object = "Antenna_Lvl" elif object == "Channel Number": object = "Ch_Number" elif object == "Channel Name": object = "Ch_Name" elif object == "Playback Info": object = "Playback_Info" elif object == "Repeat Mode": object = "Repeat" elif object == "Connect Information": object = "Connect_Info" try: return get_device_string(object, cat, section) except: eg.PrintError("Input not active or unavailable with your model.") def Configure(self, object="Power", cat="Main Zone"): panel = eg.ConfigPanel() self.cats = globals.AVAILABLE_ZONES + globals.AVAILABLE_INFO_SOURCES wx.StaticText(panel, label="Category: ", pos=(10, 10)) self.choice_cat = wx.Choice(panel, -1, (10, 30), choices=self.cats) if cat in self.cats: self.choice_cat.SetStringSelection(cat) self.choice_cat.Bind(wx.EVT_CHOICE, self.CategoryChanged) self.objects = [ 'Power', 'Sleep', 'Volume Level', 'Mute', 'Input Selection', 'Scene', 'Straight', 'Enhancer', 'Sound Program'] wx.StaticText(panel, label="Object: ", pos=(10, 60)) self.choice_object = wx.Choice(panel, -1, (10, 80), choices=self.objects) self.CategoryChanged() if object in self.objects: self.choice_object.SetStringSelection(object) while panel.Affirmed(): panel.SetResult(self.objects[self.choice_object.GetCurrentSelection()], self.cats[self.choice_cat.GetCurrentSelection()]) def CategoryChanged(self, event=None): cat = self.cats[self.choice_cat.GetCurrentSelection()] if cat == "Main Zone": self.objects = globals.MAIN_ZONE_OBJECTS elif cat.startswith("Zone"): self.objects = globals.ZONE_OBJECTS elif cat == "Tuner": self.objects = [ 'Band', 'Frequency', 'FM Mode'] elif cat == "HD Radio": self.objects = [ 'Band', 'Frequency', 'Audio Mode'] elif cat == "SIRIUS": self.objects = globals.SIRIUS_OBJECTS elif cat == "iPod": self.objects = globals.GENERIC_PLAYBACK_OBJECTS elif cat == "Bluetooth": self.objects = [ 'Connect Information'] elif cat == "Rhapsody": self.objects = globals.GENERIC_PLAYBACK_OBJECTS elif cat == "SIRIUSInternetRadio": self.objects = globals.SIRIUS_IR_OBJECTS elif cat == "Pandora": self.objects = globals.PANDORA_OBJECTS elif cat == "PC": self.objects = globals.GENERIC_PLAYBACK_OBJECTS elif cat == "NET RADIO": self.objects = globals.NET_RADIO_OBJECTS elif cat == "Napster": self.objects = globals.GENERIC_PLAYBACK_OBJECTS elif cat == "USB": self.objects = globals.GENERIC_PLAYBACK_OBJECTS elif cat == "iPod (USB)": self.objects = globals.GENERIC_PLAYBACK_OBJECTS else: eg.PrintError("Unknown Category!") self.choice_object.Clear() self.choice_object.AppendItems(self.objects) self.choice_object.SetSelection(0) class GetAvailability(eg.ActionBase): def __call__(self): setup_availability() print 'Zones:', globals.AVAILABLE_ZONES print 'Inputs:', globals.AVAILABLE_SOURCES eg.result = list(globals.AVAILABLE_SOURCES) class AutoDetectIP(eg.ActionBase): def __call__(self): ip = auto_detect_ip_threaded() if ip is not None: setup_availability() eg.result = ip class VerifyStaticIP(eg.ActionBase): def __call__(self): if globals.ip_auto_detect: eg.PrintError('Static IP is not enabled!') eg.result = False else: ip = setup_ip() if ip is not None: setup_availability() eg.result = ip is not None class NextInput(eg.ActionBase): def __call__(self, zone, inputs): izone = convert_zone_to_int(zone, convert_active=True) src = get_source_name(izone) index = inputs.index(src) if src in inputs else -1 self._next_input(izone, index, inputs) def _next_input(self, izone, cur_index, inputs): next_index = 0 if cur_index != -1: if cur_index < len(inputs) - 1: next_index = cur_index + 1 else: next_index = 0 else: # Current source not in the user's list. Change to the first item? next_index = 0 print "Warning: Current source was not in the list of sources. Changing to first source in list." print "Switching input to", inputs[next_index] change_source(inputs[next_index], izone) t = Thread(target=self._verify_input, args=[izone, next_index, inputs]) t.start() def _verify_input(self, izone, index, inputs, wait=0.3): time.sleep(wait) src = get_source_name(izone) if src != inputs[index]: eg.PrintError("Source input did not change! Your receiver may not have this input.") print "Skipping to next input." self._next_input(izone, index, inputs) def Configure(self, zone='Active Zone', inputs=['HDMI1']): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.ALL_ZONES_PLUS_ACTIVE) wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (45, 7), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) y = 45 x_start = 10 x = x_start num_per_row = 5 x_padding = 80 y_padding = 20 sources = globals.AVAILABLE_SOURCES if len(globals.AVAILABLE_SOURCES) > 0 else globals.ALL_SOURCES self.cbs = [] for i in range(len(sources)): if i > 0 and i % num_per_row == 0: x = x_start y += y_padding cb = wx.CheckBox(panel, -1, sources[i], (x, y)) cb.SetValue(sources[i] in inputs) self.cbs.append(cb) x += x_padding # Futile attempt at setting a scrollbar, not working # panel.SetScrollbar(wx.VERTICAL, 0, 95, 100) while panel.Affirmed(): res = [] for i in range(len(self.cbs)): if self.cbs[i].GetValue(): res.append(sources[i]) panel.SetResult(zones[choice_zone.GetCurrentSelection()], res) class PreviousInput(eg.ActionBase): def __call__(self, zone, inputs): izone = convert_zone_to_int(zone, convert_active=True) src = get_source_name(izone) index = inputs.index(src) if src in inputs else -1 self._prev_input(izone, index, inputs) def _prev_input(self, izone, cur_index, inputs): prev_index = 0 if cur_index != -1: if cur_index > 0: prev_index = cur_index - 1 else: prev_index = len(inputs) - 1 else: # Current source not in the user's list. Change to the first item? prev_index = 0 print "Warning: Current source was not in the list of sources. Changing to first source in list." print "Switching input to", inputs[prev_index] change_source(inputs[prev_index], izone) t = Thread(target=self._verify_input, args=[izone, prev_index, inputs]) t.start() def _verify_input(self, izone, index, inputs, wait=0.3): time.sleep(wait) src = get_source_name(izone) if src != inputs[index]: eg.PrintError("Source input did not change! Your receiver may not have this input.") print "Skipping to previous input." self._prev_input(izone, index, inputs) def Configure(self, zone='Active Zone', inputs=['HDMI1']): panel = eg.ConfigPanel() zones = get_available_zones(True, globals.ALL_ZONES_PLUS_ACTIVE) wx.StaticText(panel, label="Zone: ", pos=(10, 10)) choice_zone = wx.Choice(panel, -1, (45, 7), choices=zones) if zone in zones: choice_zone.SetStringSelection(zone) y = 45 x_start = 10 x = x_start num_per_row = 5 x_padding = 80 y_padding = 20 sources = globals.AVAILABLE_SOURCES if len(globals.AVAILABLE_SOURCES) > 0 else globals.ALL_SOURCES self.cbs = [] for i in range(len(sources)): if i > 0 and i % num_per_row == 0: x = x_start y += y_padding cb = wx.CheckBox(panel, -1, sources[i], (x, y)) cb.SetValue(sources[i] in inputs) self.cbs.append(cb) x += x_padding # Futile attempt at setting a scrollbar, not working # panel.SetScrollbar(wx.VERTICAL, 0, 95, 100) while panel.Affirmed(): res = [] for i in range(len(self.cbs)): if self.cbs[i].GetValue(): res.append(sources[i]) panel.SetResult(zones[choice_zone.GetCurrentSelection()], res) class YamahaRXClient: def __init__(self): pass def send_action(self, msg = '', type=globals.ACTION_EXECBUILTIN): if msg == 'ToggleMute': toggle_mute() elif msg == 'ToggleEnhancer': toggle_enhancer() elif msg == 'PreviousSource': next_source() elif msg == 'NextSource': previous_source() elif msg == 'NextRadioPreset': next_radio_preset() elif msg == 'PreviousRadioPreset': prev_radio_preset() elif msg == 'ToggleRadioAMFM': toggle_radio_amfm() elif msg == 'RadioAutoFeqUp': auto_radio_freq('Up') elif msg == 'RadioAutoFreqDown': auto_radio_freq('Down') elif msg == 'RadioFeqUp': manual_radio_freq('Up') elif msg == 'RadioFreqDown': manual_radio_freq('Down')