EventGhost

I can't do this right now but I might have a way to fix it. I need to do something on my end first though.


Hopefully you have a good work around if not hopefully eventghost developers will do something to address the issue.

Solution 1: Create Plugin that will send MCE/game controller events to ...

After talking with a person from silicon dust on there forums and some more testing I have finally clearly identified what and where the problem is.

The last Microsoft update changed the way UWP apps that have remote and keyboard support receive input.

Eventghosts send keystrokes plugin will need ...

Here is what is happening what I've tried and conclusions made from the results.

Is the problem hardware related = NO because happening on three different systems with different chipsets/hardware.

Is the problem related to my harmony profile + NO because problem occurs even if the Sendkey ...

Here is the reg key from my Win 7 machine. I ADDED THOSE TWO KEYS REFERENCED EARLY BACK TO MY REGISTRY


Thanks for posting that, I thought you were running windows 10 anyways I ran it through notepad plus compare plugin
and there is some small differences.
But I'm not sure if that has to do ...

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HidIr\Remotes\745a17a0-74d3-11d0-b6fe-00a0c90f57da]
"CodeSetNum0"=dword:00000001
"CodeSetNum1"=dword:00000002
"CodeSetNum2"=dword:00000003
"CodeSetNum3"=dword:00000004

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HidIr\Remotes ...

I overlooked an important detail here. You don't have your gear setup to send MCE codes, and have it setup to send those anyware codes instead, correct? Perhaps Anyware uses XP codes, which are emulated keystrokes. If these codes were taken out of Win 10 then that could be the culprit. Any program ...

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HidIr\Remotes\745a17a0-74d3-11d0-b6fe-00a0c90f57da]
"CodeSetNum0"=dword:00000001
"CodeSetNum1"=dword:00000002
"CodeSetNum2"=dword:00000003
"CodeSetNum3"=dword:00000004

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HidIr\Remotes ...

Made a Video showing whats happening

https://youtu.be/IWfSHi8g0_0

Page up and down changes channels and would still need left/right to go ahead into the guide plus to navigate recorded shows

but thanks for the suggestion

Update: I changed the keyboard up action to mouse wheel up and got basic slice navigation going again for the wife.

Temp fix I still need the keyboard navigation to really use the HDhomerun app

Thanks

The harmony profile I'm using is for Anyware media player but thats not the issue cause it's been working great until I did windows updates. I have two systems that use the same basic EG tree. One I have harmony elite for and the other a old harmony 1000. Both are showing this behavior

I have been ...

Please help,
Current config: Mce ir receiver using the eg mce remote plugin.
Harmony elite using the media center profile,

EG profile configured and was working great until the last win10 update.

Now when using the hdhomerun app EG is sending up,down,left,right keystrokes correctly

but hdhomerun ...

No I want a plugin that will do the opposite "enable exclusive"
results of both aimed at input3
Yes pako there is nothing that will do this see my first post and the board index this post is in.

The reason/example I used is just one use could be used for many things.

Here if the event "watch.TV" is fired this would be the result.
then if "play.Xbox" is fired this would be the result Do you understand how I'm trying to use this??

I've used eventghost for a while and have made stuff work but the plugin I request would make things easier. So what I'm looking for and how it could be used.
Right now the enable exclusive disables a group of macro's leaving only one enabled to accept event's. What I want is Plugin that will enable ...