Page 11 of 36
Re: RFXtrx
Posted: Fri Sep 07, 2012 6:45 pm
by krambriw
No problem , I just wanted to encourage you. Try this script then:
Code: Select all
#Broadcast RFXtrx events
newEvent = str(eg.event.suffix)
newPayload = str(eg.event.payload)
port = 33333
a = newPayload.split(':')
b = a[1]
c = b.split(' ')
d = str(c[1])
res = eg.plugins.BroadcastListener.Broadcast(
d,
'empty',
port
)
It can be written more efficient but it gives you the idea,
Best regards, Walter
Re: RFXtrx
Posted: Sat Sep 08, 2012 6:31 am
by jamesst
Thanks Wlater
Re: RFXtrx
Posted: Wed Sep 12, 2012 9:14 pm
by RichPyke
Hey,
I'm new to EventGhost, I used it about 6 months ago for some basic tasks but that was it. Now I have my RFXtrx I need to use it more. And so far it's been pretty easy going.
But, I have the OWL CM113 which is being picked up by the RFXtrx and using RFXmngr I get all the details from it;
Code: Select all
0D590123E3002E001A0000000059
Packettype = CURRENT
subtype = ELEC1 - OWL CM113, Electrisave, cent-a-meter
Sequence nbr = 35
ID = 58112
Count = 0
Channel 1 = 2.6 ampere
Channel 2 = 0 ampere
Channel 3 = 0 ampere
Signal level = 5
Battery = OK
But in event ghost I get
Code: Select all
Unknown message: ['0d', '59', '01', '17', 'e3', '00', '2e', '00', '1d', '00', '00', '00', '00', '49']
I have had a look through previous posts in this thread and saw the ones about the OWL CM119/160 on page 5 from a few months back but I'm assuming these fixes which come from that don't cover the CM113?
Basically, how can I have event ghost read the message from the OWL CM113? Do I need to make any changes anywhere? Is it a case of an update to the plugin?
Apologies if I'm asking a stupid question here, I've literally only just started playing with event ghost and the RFXtrx.
Thanks,
RIch
Re: RFXtrx
Posted: Thu Sep 13, 2012 5:50 am
by krambriw
Is it a case of an update to the plugin?
Yes it is needed, I will look into it, it might not be too hard now when I have the details you provided.
BestR Walter
Re: RFXtrx
Posted: Thu Sep 13, 2012 6:56 am
by krambriw
CM113 added, could you try it?
BestR Walter
Re: RFXtrx
Posted: Thu Sep 13, 2012 12:00 pm
by RichPyke
Thanks, that was fast!
I'll give it a try when I get home tonight and let you know what happens.
Edit.
Forgot I had Team Viewer installed... Just tried it and it works.
RFXtrx.Type: CM113 id: 58112 ' Counter: 46 Channel 1: 1.80 A Channel 2: 0.00 A Channel 3: 0.00 A signal: 5 battery: 9'
Re: RFXtrx
Posted: Sun Sep 23, 2012 11:00 am
by eddcole
Hi could you please tell me how to control the HE105 via event ghost and this plug in. I can control it with the rfxmanager using the HE tab but it won't control with the AC codes. Any ideas please
Edd
Re: RFXtrx
Posted: Sun Sep 23, 2012 12:06 pm
by krambriw
Yes I can, it is not possible. There is no support implemented in the plugin for controlling HE105.
Best regards, Walter
Re: RFXtrx
Posted: Sun Sep 23, 2012 12:48 pm
by eddcole
Thank you
Re: RFXtrx
Posted: Sun Sep 23, 2012 2:07 pm
by krambriw
In due time I will look into this. If I add it, would you be kind to try it and then report back your results?
BestR Walter
Re: RFXtrx
Posted: Mon Sep 24, 2012 10:15 am
by Pallantir
I get an error when activating X10 lighting, ARC and so on (I use ARC for motion detectors and a few other things). I don't know if it affects the performance of the plug-in. Here's the error code:
Code: Select all
12:13:41 Error compiling script.
12:13:41 Traceback (most recent call last) (1568):
12:13:41 File "C:\Programfiler\EventGhost\eg\Classes\ActionItem.py", line 121, in SetArguments
12:13:41 self.compiled = self.executable.Compile(*args)
12:13:41 File "C:\Programfiler\EventGhost\plugins\EventGhost\PythonScript.py", line 71, in __init__
12:13:41 self.PrintTraceback()
12:13:41 File "C:\Programfiler\EventGhost\plugins\EventGhost\PythonScript.py", line 97, in PrintTraceback
12:13:41 treeItem.PrintError("Traceback (most recent call last):")
12:13:41 AttributeError: 'NoneType' object has no attribute 'PrintError'
Re: RFXtrx
Posted: Mon Sep 24, 2012 11:22 am
by krambriw
Hi Pallantir,
I do not see any ref to the RFXtrx plugin in your error log. It seems you are running a script of some kind that causes the problem. Try to describe the steps I can follow to reproduce your problem.
BestR Walter
Re: RFXtrx
Posted: Mon Sep 24, 2012 11:31 am
by Pallantir
I see! Sorry, I don't know my ass from my elbow...
I have disabled everything here now, and I still get the error. Strange thing, earlier today it seemed to come and go with the X10 disabling and enabling. So then I have no idea what's wrong. I have no scripts that should cause this, even disabling everything in my setup. I have not messed with any files, but I will try to reinstall EventGhost, it may be something that's become garbled.
Edit: Installing the latest version didn't change anything. But it doesn't seem like it affects what actions I have, so I'll leave it for now.
Re: RFXtrx
Posted: Wed Sep 26, 2012 10:54 pm
by DarkCinema
Sorry for this NOOB question, I just ran into this RFXtrx433 module and would like to controll my "KlikaanKlikUit devices.
Is this possible with this plugin? What device do I select to controll "KlikAanKlikUit" devices with RFXtrx?
Re: RFXtrx
Posted: Thu Sep 27, 2012 6:07 am
by krambriw
It should work with the ARC protocol
ARC protocol
ARC is the protocol used by different brands with units having code wheels A-P/1-16:
KlikAanKlikUit, NEXA, CHACON, HomeEasy, Proove, DomiaLite, InterTechno, AB600