Page 7 of 14
Re: OnkyoISCP plugin
Posted: Mon Jan 14, 2013 7:41 am
by blaher
Owel wrote:Re-install has not fixed it.
But I don't think it will work either. Because, can you explain how the PWR01 will work if the receiver is in standby? For my understanding, if the Onkyo is in standby, all connections are closed and no new can be established until the Onkyo is turned on. correct?
No, even when it's in standby, if you have the remote network part enabled, it will listen for signals. I can turn mine on from with the PWR01 command from standby. Have you tried doing it via the webpage IP of your Onkyo?
Re: OnkyoISCP plugin
Posted: Mon Jan 14, 2013 8:53 am
by Owel
I will try it!
I've only entered ip, netmask and gateway in the onkyo setings. Is there another thing i have to configure?
Re: OnkyoISCP plugin
Posted: Mon Jan 14, 2013 3:33 pm
by Livin
Owel wrote:Re-install has not fixed it.
But I don't think it will work either. Because, can you explain how the PWR01 will work if the receiver is in standby? For my understanding, if the Onkyo is in standby, all connections are closed and no new can be established until the Onkyo is turned on. correct?
My NR818 has a Network Standby feature... if it is on, Ethernet is always on and listening for commands... thus, when you send any command it automatically turns on the receiver.
Re: OnkyoISCP plugin
Posted: Tue Jan 22, 2013 7:46 am
by Owel
Yeah, my 808 hast this network standby feature.
And it was turned off
I suggest that when I had changed network settings (IP had changed), the the network standby feature turned off automatically.
So I turned it on, and now the Plugin works as expected.
With the change I've made, the plugin meets perfectly my needs.
Owel
Re: OnkyoISCP plugin
Posted: Tue Jan 22, 2013 7:54 am
by abraxxa
Good to hear!
I'll apply the pull request as soon as I find some time, stay tuned!
Re: OnkyoISCP plugin
Posted: Tue Jan 22, 2013 4:04 pm
by Livin
love this plugin... working flawlessly for me for a week now.
let me know when you get it to read from the XLS and I'll test it. I'd really like to automate more things for the Onkyo integrating it with my MiCasaVerde Vera to create Scenes but I'm waiting for the XLS integration.
Re: OnkyoISCP plugin
Posted: Tue Jan 22, 2013 4:34 pm
by abraxxa
There won't be any XLS integration because XLS is a closed-source format with licensing from Microsoft.
Re: OnkyoISCP plugin
Posted: Tue Jan 22, 2013 5:02 pm
by Livin
abraxxa wrote:There won't be any XLS integration because XLS is a closed-source format with licensing from Microsoft.
if you want to make the interface CSV that would be great since XLS, and all known spreadsheet formats, can be exported to CSV.
BTW... 99+% of all business spreadsheets are in XLS format, the 'format' and interface to XLS/XLSX is published and not closed in any way - hundreds of thousands of applications interface into XLS and have been for many years. The only thing 'closed' is the source code for Excel. Microsoft does not protect or limit anyone use of XLS files in any way.
I worked for Microsoft years ago, very familiar with this subject
Re: OnkyoISCP plugin
Posted: Mon Mar 04, 2013 10:13 am
by Owel
just a note:
I have messured the current consumption while network standby feature enabled and disabled.
Result:
network standby feature enabled 50W in standby
network standby feature disabled 0W in standby (0W is not possible, but i think it is ~ 1-2W)
So just for turning the Onkyo on, 50W is quite a lot. I've deactivated that feature.
Controlling the Onkyo when it is on still works...
Owel
Re: OnkyoISCP plugin
Posted: Mon Mar 04, 2013 3:52 pm
by Livin
Owel wrote:just a note:
I have messured the current consumption while network standby feature enabled and disabled.
Result:
network standby feature enabled 50W in standby
network standby feature disabled 0W in standby (0W is not possible, but i think it is ~ 1-2W)
So just for turning the Onkyo on, 50W is quite a lot. I've deactivated that feature.
Controlling the Onkyo when it is on still works...
Owel
it varies greatly based on your model. I have an NR818 so the network standby power is so low it does not matter. See the post from a user on AVSforum...
Originally Posted by rworne
I have to say from the start, Onkyo did a hell of a job cutting down the standby power on this device. All measurements were made in watts using a standard Kill-a-Watt device after doing a factory reset on all these devices.
Out of box (Net Off, HDMI RIHD Off):
TX-NR818 Standby 0.0 W
TX-NR818 On 80.0 W (idle, on BD input, nothing playing)
TX-NR609 Standby 0.0 W
TX-NR609 On 112.0 W (idle, on BD input, nothing playing)
HT-RC180 Standby 0.0 W
HT-RC180 On 100.0 W (idle, on BD input, nothing playing) This is basically the same as a TX-NR807
Network Control Enabled:
TX-NR818 Standby 2.2 W
TX-NR609 Standby 29.1 W
HT-RC180 Standby 49.7 W
HDMI RIHD On (enable ARC and pass-thru)
TX-NR818 Standby 7.2 W
TX-NR609 Standby 29.3 W
HT-RC180 Standby 49.9 W
Net and HDMI enabled:
TX-NR818 Standby 8.4 W
TX-NR609 Standby 29.5 W
HT-RC180 Standby 50.1 W
Re: OnkyoISCP plugin
Posted: Sun Mar 17, 2013 5:58 am
by Livin
Owel,
I see the below error often. It repeats forever, locking up EG.
Code: Select all
OnkyoISCP: [Errno 10054] An existing connection was forcibly closed by the remote host
here's a large portion of the log right before the repeating error, to give you an idea but I don't see anything that 'should' be causing this other than something in the plugin erroring...
Code: Select all
2013-03-16 22:30:08 ACTION: XBMC2: ContextMenu
2013-03-16 22:30:09 EVENT: USB_UIRT.Mce.Up
2013-03-16 22:30:09 MACRO: Up
2013-03-16 22:30:09 ACTION: XBMC2: Up
2013-03-16 22:30:09 ACTION: Autorepeat current macro: 0.6
2013-03-16 22:30:09 EVENT: USB_UIRT.Mce.Up
2013-03-16 22:30:09 MACRO: Up
2013-03-16 22:30:09 ACTION: XBMC2: Up
2013-03-16 22:30:09 ACTION: Autorepeat current macro: 0.6
2013-03-16 22:30:10 EVENT: USB_UIRT.Mce.Up
2013-03-16 22:30:10 MACRO: Up
2013-03-16 22:30:10 ACTION: XBMC2: Up
2013-03-16 22:30:10 ACTION: Autorepeat current macro: 0.6
2013-03-16 22:30:10 EVENT: USB_UIRT.Mce.Ok
2013-03-16 22:30:10 MACRO: Select
2013-03-16 22:30:10 ACTION: XBMC2: Select
2013-03-16 22:30:11 EVENT: USB_UIRT.Mce.Left
2013-03-16 22:30:11 MACRO: Left
2013-03-16 22:30:11 ACTION: XBMC2: Left
2013-03-16 22:30:11 ACTION: Autorepeat current macro: 0.6
2013-03-16 22:30:12 EVENT: USB_UIRT.Mce.Ok
2013-03-16 22:30:12 MACRO: Select
2013-03-16 22:30:12 ACTION: XBMC2: Select
2013-03-16 22:30:13 EVENT: USB_UIRT.Mce.Left
2013-03-16 22:30:13 MACRO: Left
2013-03-16 22:30:13 ACTION: XBMC2: Left
2013-03-16 22:30:13 ACTION: Autorepeat current macro: 0.6
2013-03-16 22:30:14 EVENT: USB_UIRT.Mce.Ok
2013-03-16 22:30:14 MACRO: Select
2013-03-16 22:30:14 ACTION: XBMC2: Select
2013-03-16 22:30:19 EVENT: USB_UIRT.NEC.259B710E
2013-03-16 22:30:19 MACRO: System.OFF
2013-03-16 22:30:19 ACTION: Trigger event "Zone2.OFF"
2013-03-16 22:30:19 ACTION: Trigger event "wmc.close"
2013-03-16 22:30:19 ACTION: Trigger event "xbmc.close"
2013-03-16 22:30:19 EVENT: Main.Zone2.OFF
2013-03-16 22:30:19 MACRO: Zone2.OFF
2013-03-16 22:30:19 ACTION: If Main turns OFF, turn OFF Zone2
2013-03-16 22:30:19 ACTION: Onkyo ISCP: SendCommand: ZPW00
2013-03-16 22:30:19 EVENT: Main.wmc.close
2013-03-16 22:30:19 MACRO: WMC - close
2013-03-16 22:30:19 ACTION: Find Window: ehshell.exe
Re: OnkyoISCP plugin
Posted: Mon Mar 18, 2013 1:29 pm
by Owel
I don't get your point....
of course the error comes from the plugin. The plugin cannot connect to the onkyo...
Re: OnkyoISCP plugin
Posted: Mon Mar 18, 2013 3:59 pm
by Livin
well it comes with major problems...
it logs thousands of these error very quickly which essentially locks up EG since it is so busy logging your errors it does not respond to other actions. in just a few minutes my log was over 500MB on disk.
Re: OnkyoISCP plugin
Posted: Mon Mar 18, 2013 5:09 pm
by abraxxa
That's because of your auto-repeat option, not some direct problem of the plugin.
There is nothing I can do in the plugin to prevent you from shooting you in the foot.
Re: OnkyoISCP plugin
Posted: Mon Mar 18, 2013 8:34 pm
by Livin
abraxxa wrote:That's because of your auto-repeat option, not some direct problem of the plugin.
There is nothing I can do in the plugin to prevent you from shooting you in the foot.
Autorepeat has nothing to do with the problem - it is a option in the XBMC plugin and has nothing to do with any other plugin/command/etc
When the problem occurs all human input/activity has stopped and the Onkyo is in standby (network is always alive).
Please look at this with an open mind and lets try to figure out why this is happening. It does not happen all the time but about once every day two. The PC is rebooted every night.
Log when things work as they should...
2013-03-17 21:51:33 EVENT: USB_UIRT.NEC.259B710E
2013-03-17 21:51:33 MACRO: System.OFF
2013-03-17 21:51:33 ACTION: Trigger event "Zone2.OFF"
2013-03-17 21:51:33 ACTION: Trigger event "wmc.close"
2013-03-17 21:51:33 ACTION: Trigger event "xbmc.close"
2013-03-17 21:51:33 EVENT: Main.Zone2.OFF
2013-03-17 21:51:33 MACRO: Zone2.OFF
2013-03-17 21:51:33 ACTION: If Main turns OFF, turn OFF Zone2
2013-03-17 21:51:33 ACTION: Onkyo ISCP: SendCommand: ZPW00
2013-03-17 21:51:33 EVENT: Main.wmc.close
2013-03-17 21:51:33 MACRO: WMC - close
2013-03-17 21:51:33 ACTION: Find Window: ehshell.exe
2013-03-17 21:51:36 EVENT: Main.xbmc.close
2013-03-17 21:51:36 MACRO: XBMC - close
2013-03-17 21:51:36 ACTION: Find Window: XBMC.exe
2013-03-17 21:51:38 ACTION: Kill XBMC process
2013-03-17 21:51:41 EVENT: USB_UIRT.Unknown.10
2013-03-17 21:51:41 EVENT: USB_UIRT.NEC.25A4710E
2013-03-17 21:51:41 EVENT: USB_UIRT.Unknown.10
2013-03-17 21:51:41 EVENT: OnkyoISCP.PWR '00'
2013-03-17 21:51:41 EVENT: OnkyoISCP.PWR00
2013-03-17 21:51:41 MACRO: Zone2.OFF
2013-03-17 21:51:41 ACTION: If Main turns OFF, turn OFF Zone2
2013-03-17 21:51:41 ACTION: Onkyo ISCP: SendCommand: ZPW00
2013-03-17 21:51:41 EVENT: System.DeviceRemoved [u'\\\\?\\DISPLAY#ONK0C81#5&30f4f1ad&5&UID1057568#{e6f07b5f-ee97-4a90-b076-33f57bf4eaa7}']
2013-03-17 21:51:41 EVENT: OnkyoISCP.ZPW '00'
2013-03-17 21:51:41 EVENT: OnkyoISCP.ZPW00
Log from when OnkyoISCP plugin went into its loop...
2013-03-16 22:30:19 EVENT: USB_UIRT.NEC.259B710E
2013-03-16 22:30:19 MACRO: System.OFF
2013-03-16 22:30:19 ACTION: Trigger event "Zone2.OFF"
2013-03-16 22:30:19 ACTION: Trigger event "wmc.close"
2013-03-16 22:30:19 ACTION: Trigger event "xbmc.close"
2013-03-16 22:30:19 EVENT: Main.Zone2.OFF
2013-03-16 22:30:19 MACRO: Zone2.OFF
2013-03-16 22:30:19 ACTION: If Main turns OFF, turn OFF Zone2
2013-03-16 22:30:19 ACTION: Onkyo ISCP: SendCommand: ZPW00
2013-03-16 22:30:19 EVENT: Main.wmc.close
2013-03-16 22:30:19 MACRO: WMC - close
2013-03-16 22:30:19 ACTION: Find Window: ehshell.exe
2013-03-16 22:30:19 OnkyoISCP: [Errno 10054] An existing connection was forcibly closed by the remote host
2013-03-16 22:30:19 OnkyoISCP: [Errno 10054] An existing connection was forcibly closed by the remote host
2013-03-16 22:30:19 OnkyoISCP: [Errno 10054] An existing connection was forcibly closed by the remote host
2013-03-16 22:30:19 OnkyoISCP: [Errno 10054] An existing connection was forcibly closed by the remote host
2013-03-16 22:30:19 OnkyoISCP: [Errno 10054] An existing connection was forcibly closed by the remote host