Page 7 of 28
Re: Plugin: TellStick Duo
Posted: Thu Jan 03, 2013 6:11 pm
by User1306
Thank you very much for the feedback, the issue for me is new, I have noticed 4 or 5 times since i recently upgraded to tellstick duo, but not sure when exactly it's occurring.
My PC does go to sleep mode after 3 hours then an hour later into hibernate. I will update my drivers to the ones mention above and report back.
About stopping all_good_morning and _good_night task that works perfect for me, as I only have one running at time.
Thanks and pleas let me know If i can help you track this down.
Re: Plugin: TellStick Duo
Posted: Fri Jan 04, 2013 7:05 am
by krambriw
I have now tried both the hibernate and the standby modes on a laptop and during this test, the Telldus service crashed every time when resuming. My conclusion is that it doesn't work properly to let the PC go into those states and then recover back to a working system with the TellStickDuo plugin. At least not for the moment or if someone has a different setup that might work.
My assumption is that you are running the computer 24/7 and not entering those modes (or other energy saving schema's) that might affect the functionality.
About stopping all_good_morning and _good_night task that works perfect for me, as I only have one running at time.
I have now a working prototype version but some final questions:
In what state should I set the lamp when I stop the things?
- GoodMorning lamps should be fully turned on/turned off or left at the current dim level?
- GoodNight lamps should be fully turned on/turned off or left at the current dim level?
BestR Walter
Re: Plugin: TellStick Duo
Posted: Sat Jan 05, 2013 2:34 am
by User1306
It's not necessary that the error happens right after the computer resumes from sleep or hirbernate mode. Today all of the sudden my eventghost was not responding, computer was on all day it did not go into sleep mode. Then I realized that message had appeared and caused EG to freeze.
Regarding the GM and GN I would suggest, for Good_morning: once stopped it pauses on dim level. For good_night: once stopped its turned off. Or if easier then make both tasks dim on the current level if the process stops, then if needed you can send another trigger to turn it off.
Thanks for th help
Re: Plugin: TellStick Duo
Posted: Sat Jan 05, 2013 10:28 am
by krambriw
This is a bit tricky because I am not able to reproduce the problems reported. As you see from below in my log file, it works just perfectly well to create "New" all the time; the duo is gets disabled, then started again and events are coming in...I tested to create "New" three times without closing EG or saving in between...
I have published a new version with improvements that might help as well as with some other new features.
Lets see how this works out,
Best regards, Walter
Code: Select all
11:05:30 ---> Welcome to EventGhost <---
11:05:30 Loading library
11:05:30 Initiating TellStick Duo...
11:05:30 Starting TellStick Duo...
11:05:30 Main.OnInit
11:05:35 TellStickDuo.mandolyn.temperaturehumidity.81.Temperature: '-1.7'
11:05:35 TellStickDuo.mandolyn.temperaturehumidity.81.Humidity: '93'
11:05:43 Closing library
11:05:43 Disables TellStick Duo...
11:05:45 Closing TellStick Duo...
11:05:45 Main.OnInit
11:06:13 Loading library
11:06:13 Initiating TellStick Duo...
11:06:13 Starting TellStick Duo...
11:06:26 TellStickDuo.mandolyn.temperaturehumidity.11.Temperature: '-1.7'
11:06:26 TellStickDuo.mandolyn.temperaturehumidity.11.Humidity: '91'
11:06:29 TellStickDuo.oregon.1A2D.32.Temperature: '-0.9'
11:06:33 TellStickDuo.oregon.1A2D.21.Temperature: '22.3'
11:07:03 Closing library
11:07:03 Disables TellStick Duo...
11:07:05 Closing TellStick Duo...
11:07:05 Main.OnInit
11:07:32 Loading library
11:07:32 Initiating TellStick Duo...
11:07:32 Starting TellStick Duo...
11:07:43 TellStickDuo.oregon.1A2D.166.Temperature: '23.2'
11:08:32 TellStickDuo.oregon.1A2D.32.Temperature: '-0.8'
11:12:26 TellStickDuo.mandolyn.temperaturehumidity.11.Temperature: '-1.6'
11:14:17 System.Idle
11:14:35 TellStickDuo.mandolyn.temperaturehumidity.81.Temperature: '-1.6'
11:14:48 System.UnIdle
11:22:26 TellStickDuo.mandolyn.temperaturehumidity.11.Temperature: '-1.5'
11:22:35 TellStickDuo.mandolyn.temperaturehumidity.81.Temperature: '-1.5'
11:23:26 TellStickDuo.mandolyn.temperaturehumidity.11.Temperature: '-1.6'
11:23:35 TellStickDuo.mandolyn.temperaturehumidity.81.Temperature: '-1.6'
11:24:24 Closing library
11:24:24 Disables TellStick Duo...
11:24:26 Closing TellStick Duo...
11:24:26 Main.OnInit
11:24:38 Loading library
11:24:38 Initiating TellStick Duo...
11:24:38 Starting TellStick Duo...
11:26:05 TellStickDuo.Garage.OFF 'codeswitch:nexa.41'
11:26:06 TellStickDuo.Garage.ON 'codeswitch:nexa.41'
11:26:26 TellStickDuo.mandolyn.temperaturehumidity.11.Temperature: '-1.5'
11:27:35 TellStickDuo.mandolyn.temperaturehumidity.81.Temperature: '-1.5'
Re: Plugin: TellStick Duo
Posted: Sat Jan 05, 2013 10:51 am
by vuego
Excellent! I think you fixed it, Walter
I can now exit EventGhost normally after seeing the restart message.
I see a difference in the log when stopping the plugin now.
5 jan 2013 version works:
11:43:53 Closing library
11:43:53 Disables TellStick Duo...
11:43:55 Closing TellStick Duo...
2 dec 2012 version that hanged EG:
11:44:46 Disables TellStick Duo...
11:44:46 Disables TellStick Duo...
11:44:46 Closing library
11:44:46 Closing TellStick Duo...
Re: Plugin: TellStick Duo
Posted: Tue Jan 08, 2013 9:00 am
by krambriw
On request, I will here describe how the new sensor checking feature can be used to restart Telldus Service in case events from sensors has stopped coming in to EG (and maybe other clients as well).
The sensor checking works in the way as described in the first post, just repeating here for convenience:
The solution is based on an dynamic and adaptive method, counting sensor events and measuring the time between. Based on this, calculating an estimated forecast for next expected event to happen.
When the checking detects the error, an event will be generated:
"Expected TellStick Duo sensor callbacks ended, restart Telldus service..."
This event can be used (drag it or define it) into a macro that also includes some more commands to first stop and then start the Telldus Service. Example as below:
- Image2.png (5.02 KiB) Viewed 8634 times
The content of the action to stop the service
- Image3.png (8.89 KiB) Viewed 8634 times
The content of the action to start the service
- Image5.png (8.88 KiB) Viewed 8634 times
Re: Plugin: TellStick Duo
Posted: Wed Jan 09, 2013 12:59 pm
by Freddan101
Thank you for this nice plugin. Works great! Though I got one question and this might be a general question for EG.
When I have ├à, ├ä or ├û in the device name, e.g. F├Ânster, Motorv├ñrmare etc. EG seems not to be able to process. Is this a general issue in EG and is there any way around? I'm working on the WAF with the new automation project at home and not being able to use Swedish characters would danger the, this far very promising, WAF trend...
Code: Select all
Watch gCal
Traceback (most recent call last):
Python script "0", line 316, in <module>
WatchGCal()
Python script "0", line 274, in WatchGCal
gCalEvents.update(GetGCalEvents(gCalXML,now_Struct_UTC))
Python script "0", line 183, in GetGCalEvents
evt=GetGCalEvent(GetGCalNthEntry(gCalXML,x),now_Struct_UTC)
Python script "0", line 200, in GetGCalEvent
entryTitle = GetEntryTitle(gCalEntryXML)
Python script "0", line 131, in GetEntryTitle
result=GetEltData(entryXML,"title")
Python script "0", line 46, in GetEltData
logThis("Exiting GetEltData and returning " + str(result),4)
UnicodeEncodeError: 'ascii' codec can't encode character u'\xe4' in position 4: ordinal not in range(128)
Traceback (most recent call last) (1600):
File "C:\Program Files (x86)\EventGhost\eg\Classes\Scheduler.py", line 137, in MainLoop
func(*args, **kwargs)
File "0", line 274, in WatchGCal
File "0", line 183, in GetGCalEvents
File "0", line 200, in GetGCalEvent
File "0", line 131, in GetEntryTitle
File "0", line 46, in GetEltData
UnicodeEncodeError: 'ascii' codec can't encode character u'\xe4' in position 4: ordinal not in range(128)
Re: Plugin: TellStick Duo
Posted: Wed Jan 09, 2013 6:52 pm
by krambriw
Thats completely on my side, I do not handle unicode chars correctly when triggering events (and logging to file). I have found the reason and solution, just allow some more time for my internal testing....
Re: Plugin: TellStick Duo
Posted: Wed Jan 09, 2013 10:41 pm
by Freddan101
krambriw wrote:Thats completely on my side, I do not handle unicode chars correctly when triggering events (and logging to file). I have found the reason and solution, just allow some more time for my internal testing....
Sounds very promising! Thank you for looking into this.
Re: Plugin: TellStick Duo
Posted: Thu Jan 10, 2013 7:32 am
by krambriw
This is a test version that should handle unicode chars correctly (it looks ok with ├Â,├ñ,├Ñ).
Just for your info, it is up to every component (script, plugin) to handle this properly so there is no general thing in EG for this.
Could you try it before I publish it?
BestR Walter
Re: Plugin: TellStick Duo
Posted: Thu Jan 10, 2013 8:30 am
by Freddan101
krambriw wrote:This is a test version that should handle unicode chars correctly (it looks ok with ├Â,├ñ,├Ñ).
Just for your info, it is up to every component (script, plugin) to handle this properly so there is no general thing in EG for this.
Could you try it before I publish it?
BestR Walter
__init__.py
Just tried it and I'm still getting an error when I try to add an action to turn on a device with unicode chars. Also when choosing the device in the dropdown list the unicode chars are not displayed correctly.
I just replaced the .py file and restarted EG. Is there anything else I need to do?
Code: Select all
09:27:07 Traceback (most recent call last) (1600):
09:27:07 File "wx\_core.pyc", line 14660, in <lambda>
09:27:07 File "C:\Program Files (x86)\EventGhost\eg\Core.py", line 197, in Notify
09:27:07 listener(value)
09:27:07 File "C:\Program Files (x86)\EventGhost\eg\Classes\MainFrame\TreeCtrl.py", line 828, in OnNodeChanged
09:27:07 self.SetItemText(itemId, node.GetLabel())
09:27:07 File "C:\Program Files (x86)\EventGhost\eg\Classes\ActionItem.py", line 179, in GetLabel
09:27:07 name = pluginInfo.label + ": " + name
09:27:07 UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 18: ordinal not in range(128)
Re: Plugin: TellStick Duo
Posted: Thu Jan 10, 2013 12:22 pm
by krambriw
Sorry, found the problem also in several other places in the code
BestR
Re: Plugin: TellStick Duo
Posted: Thu Jan 10, 2013 3:29 pm
by Freddan101
krambriw wrote:Sorry, found the problem also in several other places in the code
BestR
__init__.py
Works like a dream!
Many thanks for helping out so quickly.
Re: Plugin: TellStick Duo
Posted: Thu Jan 10, 2013 11:23 pm
by User1306
@krambriw
i'm afraid to say i still have the issue with Restarting of EG after a suspend and now it happens more than often.
However; one of the times i got this error in the Log maybe it'll help.
i tired to use the EG app plugin to do an automatic restart once "Restart of EG needed" appears in the log but EG freezes until you click OK on the message window.
Code: Select all
00:11:52 System.Suspend
00:11:52 Suspending... None
00:11:52 Traceback (most recent call last) (1600):
00:11:52 File "C:\Program Files\EventGhost\eg\Classes\ActionThread.py", line 101, in OnComputerSuspend
00:11:52 plugin.OnComputerSuspend(None)
00:11:52 File "C:\Program Files\EventGhost\plugins\TellStickDuo\__init__.py", line 339, in OnComputerSuspend
00:11:52 self.__stop__()
00:11:52 File "C:\Program Files\EventGhost\plugins\TellStickDuo\__init__.py", line 323, in __stop__
00:11:52 self.unregisterCallbacks()
00:11:52 File "C:\Program Files\EventGhost\plugins\TellStickDuo\__init__.py", line 504, in unregisterCallbacks
00:11:52 self.dll.tdUnregisterCallback( self.callbackId_0 )
00:11:52 WindowsError: exception: access violation reading 0x00000004
00:12:07 Resuming... None
00:12:07 Loading library
00:12:07 Restart of EG needed
Re: Plugin: TellStick Duo
Posted: Fri Jan 11, 2013 6:53 am
by krambriw
Interesting, I think about two things I would like to try,
- I will remove the message box stuff to allow EG to continue
- I will add a wait time (30 sec for testing) on resume to allow the Telldus driver and service etc to start properly before I try to reconnect to Tellstick callbacks
I have no idea if this will work but please try it and do a suspend/resume testing
Attached is a version with the above changes
BestR