EventGhost

Sorry for the previous post. It is all working fine. I used the wrong IP.

Thank you krambriw for the plugin. I am trying to install the new paho plugin. First when I was adding the plugin the eg was crushing . Then I moved the paho directory to sit-pakages and I was able to add the plugin.
Now when I want to subscribe this happens:
09:25:21 Exception in thread malinka:
09 ...

Thanks Supa. My problem are the bulbs. I have both color and white only bulbs. The white only can only be controlled with app interface (3). The color bulbs only by interface (4). Your plugin works only with the color bulbs and does not work with white only.
This is the bulb not compatibile with ...

I am using the same app. The app controlls my lamp, no problem. The plugin has the right IP and port. I can login into the milight hub with the mentioned IP. The setup page shows the port 8899 and UDP protocol. When iItry to use action like all lights on or off there is nothing happening. When I try ...

Thanks SoopaNoob for the plugin. Yesterday I received my milights. I set them up according to the manuals: Protocol: UDP port 8899: Work Mode STA. My router assigns the same IP to the hub. It all works with the android app, but I have no reaction to the plugin. What am I doing wrong?

16:36:31 SSH.Connected.NG
16:36:34 SSH.New_line.NG 'Tomato v1.28.0000 -129 K26ARM USB AIO-64K'
16:36:34 SSH.New_line.NG ' ======================================================== '
16:36:34 SSH.New_line.NG ' Welcome to the Netgear R7000 [NG-90]'
16:36:34 SSH.New_line.NG ' Uptime: 16:36:31 up 8:38 ...

The router can handle multiple connections. It has 256Megs of ram double CPU arm7. It is quite powerful. Runs web server and mysql etc.
Fresh booted PC, SSH v1.74 - EG connects and after 10 secs disconnects. I can exit EG cleanly but when I run EG again I onlt get : 16:30:09 SSH: Add Host: 192.168 ...

Hi Semi;colon,
The one without the timeout works fine I can send a command.
The v 1.74 connects to the router fine and stay connected while I am sending a command but when I stop executing a command it disconnects after 10 seconds. After disconnecting it is not connecting again I have to boot my PC ...

Looking at the router logs I can see that eventghost disconects from the router within one second of connecting.

May 17 14:50:52 NG-90 authpriv.notice dropbear[30867]: Password auth succeeded for 'root' from 192.168.90.1:49353
May 17 14:51:07 NG-90 authpriv.info dropbear[31080]: Child connection ...

Thanks again.
I tried this on 2 different PC with event ghost installed the results are identical:
14:50:53 SSH.Connected.NG-90
14:50:56 SSH.New_line.NG-90 'Tomato v1.28.0000 -129 K26ARM USB AIO-64K'
14:50:56 SSH.New_line.NG-90 ' ======================================================== '
14:50:56 ...

Thank you semi.
Unfortunately, it still does not work.
This is my login screen from putty:
login as: root
root@NG-90's password:


Tomato v1.28.0000 -129 K26ARM USB AIO-64K
========================================================
Welcome to the Netgear R7000 [NG-90]
Uptime: 13:35:08 up 11:03 ...

This is what EG says:
SSH.Connected.NG
SSH.New_line.NG 'Tomato v1.28.0000 -129 K26ARM USB AIO-64K'
SSH.New_line.NG ' ======================================================== '
SSH.New_line.NG ' Welcome to the Netgear R7000 [NG-90]'
SSH.New_line.NG ' Uptime: 09:45:35 up 7:14'
SSH.New_line.NG ' Load ...

Thanks for the plugin, Sem;colon.
It is working with my raspberry and ubuntu no problem. I have problems with my router. It is running tomato usb on Netgear R7000 arm7 processor. SSH server works OK. I can login with putty from the PC running eventghost but it seems that the plugin shortly after ...

Thanks krambriv. Do you know what version was still working on XP?

I have installed fresh windows xp on an old think pad.
My fresh installation of eventghost crashes. Event viewer: Faulting application eventghost.exe, version 0.4.1.1700, faulting module cfunctions.pyd, version 0.0.0.0, fault address 0x000024b4.
Any ideas what could be the problem?