Hi everybody!
I have MCE RC6 remote and reciever with IR blaster.
I would like to know if you can halp me with emmiting this code down there.
It's a LG service remote control 2 buttons signal recorded by LIRC or something.
It says its in HEX code.
Is there a way to translate this code for both buttons so I can use the "MCE transmit IR code" option to enter service menu on my TV.
Thanks in advance.
#
# this config file was automatically generated
# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Fri Nov 06 09:28:29 2009
#
# contributed by h.rorschach / mon
#
# brand: LG
# model: IN-START Service Menu + EZ Adjust Service Menu
# supported devices: LG
#
begin remote
name LG_SERVICE_MENU
flags RAW_CODES
eps 55
aeps 100
ptrail 534
repeat 9145 2222
gap 40702
begin raw_codes
name IN_START
9000 4600 550 600 550 600
550 1700 550 600 550 600
550 600 550 600 550 600
550 1700 550 1700 550 600
550 1700 550 1700 550 1700
550 1700 550 1700 550 1700
550 1700 550 600 550 1700
550 1700 550 1700 550 1700
550 1700 550 600 550 600
550 1700 550 600 550 600
550 600 550 600 550 600
550 600
name EZ_ADJUST
9000 4600 550 600 550 600
550 1700 550 600 550 600
550 600 550 600 550 600
550 1700 550 1700 550 600
550 1700 550 1700 550 1700
550 1700 550 1700 550 1700
550 1700 550 1700 550 1700
550 1700 550 1700 550 1700
550 1700 550 600 550 600
550 600 550 600 550 600
550 600 550 600 550 600
550 600
end raw_codes
end remote
Notice: This forum has been recovered from an old backup, so some content, links, and dates may be outdated. The forum is currently read-only while we restore sign-in and registration functionality. Details
If you find this forum valuable and would like to help keep it online, donations to help cover hosting and domain costs are greatly appreciated, but never expected. You can support the forum through Buy Me a Coffee or Ko-fi. Thank you for helping preserve the EventGhost community.
If you find this forum valuable and would like to help keep it online, donations to help cover hosting and domain costs are greatly appreciated, but never expected. You can support the forum through Buy Me a Coffee or Ko-fi. Thank you for helping preserve the EventGhost community.
MCE remote/reciever and transmiting signals
-
tihomir999
- Posts: 3
- Joined: Sun Feb 07, 2010 4:39 pm
-
tihomir999
- Posts: 3
- Joined: Sun Feb 07, 2010 4:39 pm
Re: MCE remote/reciever and transmiting signals
I've found this same code but written differently...
Can this help?
1.
#
2.
# this config file was automatically generated
3.
# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Fri Nov 06 09:28:29 2009
4.
#
5.
# contributed by h.rorschach / mon
6.
#
7.
# brand: LG
8.
# model: IN-START Service Menu + EZ Adjust Service Menu
9.
# supported devices: LG
10.
#
11.
12.
begin remote
13.
14.
name LG_SERVICE_MENU
15.
flags RAW_CODES
16.
eps 55
17.
aeps 100
18.
19.
ptrail 534
20.
repeat 9145 2222
21.
gap 40702
22.
23.
24.
begin raw_codes
25.
26.
name IN_START
27.
9000 4600 550 600 550 600
28.
550 1700 550 600 550 600
29.
550 600 550 600 550 600
30.
550 1700 550 1700 550 600
31.
550 1700 550 1700 550 1700
32.
550 1700 550 1700 550 1700
33.
550 1700 550 600 550 1700
34.
550 1700 550 1700 550 1700
35.
550 1700 550 600 550 600
36.
550 1700 550 600 550 600
37.
550 600 550 600 550 600
38.
550 600
39.
40.
name EZ_ADJUST
41.
9000 4600 550 600 550 600
42.
550 1700 550 600 550 600
43.
550 600 550 600 550 600
44.
550 1700 550 1700 550 600
45.
550 1700 550 1700 550 1700
46.
550 1700 550 1700 550 1700
47.
550 1700 550 1700 550 1700
48.
550 1700 550 1700 550 1700
49.
550 1700 550 600 550 600
50.
550 600 550 600 550 600
51.
550 600 550 600 550 600
52.
550 600
53.
54.
end raw_codes
55.
56.
end remote
Can this help?
1.
#
2.
# this config file was automatically generated
3.
# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Fri Nov 06 09:28:29 2009
4.
#
5.
# contributed by h.rorschach / mon
6.
#
7.
# brand: LG
8.
# model: IN-START Service Menu + EZ Adjust Service Menu
9.
# supported devices: LG
10.
#
11.
12.
begin remote
13.
14.
name LG_SERVICE_MENU
15.
flags RAW_CODES
16.
eps 55
17.
aeps 100
18.
19.
ptrail 534
20.
repeat 9145 2222
21.
gap 40702
22.
23.
24.
begin raw_codes
25.
26.
name IN_START
27.
9000 4600 550 600 550 600
28.
550 1700 550 600 550 600
29.
550 600 550 600 550 600
30.
550 1700 550 1700 550 600
31.
550 1700 550 1700 550 1700
32.
550 1700 550 1700 550 1700
33.
550 1700 550 600 550 1700
34.
550 1700 550 1700 550 1700
35.
550 1700 550 600 550 600
36.
550 1700 550 600 550 600
37.
550 600 550 600 550 600
38.
550 600
39.
40.
name EZ_ADJUST
41.
9000 4600 550 600 550 600
42.
550 1700 550 600 550 600
43.
550 600 550 600 550 600
44.
550 1700 550 1700 550 600
45.
550 1700 550 1700 550 1700
46.
550 1700 550 1700 550 1700
47.
550 1700 550 1700 550 1700
48.
550 1700 550 1700 550 1700
49.
550 1700 550 600 550 600
50.
550 600 550 600 550 600
51.
550 600 550 600 550 600
52.
550 600
53.
54.
end raw_codes
55.
56.
end remote
-
tihomir999
- Posts: 3
- Joined: Sun Feb 07, 2010 4:39 pm
Re: MCE remote/reciever and transmiting signals
Can anyone help me?
Re: MCE remote/reciever and transmiting signals
This isn't lirc. I don't know how to translate that code.
Brett
Brett