how do I add a macros with 2 digits such as, 11 or 13?

ann · Post by **ann** » Sun Mar 21, 2010 1:36 am

hi, i'm using version 0.3.7r1436, and vista. how do I add a macros with 2 digits such as, 11 or 13? i need help, i'm new.

Pako · Post by **Pako** » Sun Mar 21, 2010 6:50 am

You can try for example Multitap.

A short tutorial is here.
Pako

ann · Post by **ann** » Sun Mar 21, 2010 6:46 pm

I don't understand the tutorial, it's too tecno. can you explain it in more simple terms?

Pako · Post by **Pako** » Mon Mar 22, 2010 11:10 am

ann wrote:can you explain it in more simple terms?

Sure, I can.
From which point you do not understand?
Indeed it is very simple.

Pako

ann · Post by **ann** » Wed Mar 24, 2010 4:52 am

i'm stuck on Step two - macros. i don't know what to put in the 2 boxes. i tried channel 1 and channel 3, and it didn't work.

Pako · Post by **Pako** » Wed Mar 24, 2010 3:20 pm

Now you I'm not sure whether I correctly understand your original question.
You may need just the numbers 11 and 13 and no other you need.
If so, then is not the right solution Multitap. Using Multitap You can create an event with any (even previously unknown) number.
You type the number using the number keys on the remote control.
I can not properly advise you, if I do not know what your macros are used and how the numbers 11 and 13 has a macro to work.
Can you clarify?

Pako

ann · Post by **ann** » Wed Mar 24, 2010 6:15 pm

i need several 2 digit channels for my tv remote. i can program a 1 digit channel but not 2 digits. i need to know how to do that. the buttons on my remote are 1-9. i don't have 11 or 13 on the remote.

Pako · Post by **Pako** » Wed Mar 24, 2010 7:08 pm

Okay, so you can use the Multitap.
I'll do a little picture-tutorial, but I still missing one information from you.
I still do not know, how your macro (which will be running from events with channel number) is assembled.
I do not know where and how the information about the channel number is sent. Perhaps it's best if you put a picture here.
Can of course be a channel with one digit.
Pako

ann · Post by **ann** » Wed Mar 24, 2010 7:20 pm

i'm not sure what you mean. i'm using tira to send my ir to the tv.

Pako · Post by **Pako** » Thu Mar 25, 2010 7:49 am

ann wrote: i'm using tira to send my ir to the tv.

I think this information is sufficient for me. By this time the Tira plugin was no mention at all.
According to the attached pictures you can probably create a functional configuration.
I do not own the device Tira and I do not know, how actually look chain of events.
So you (for example) instead of "Tira.Num3" use some other string.
You do not have to use some macros of plugin Multitap (Enter, Cancel, Left, Right, Back Space).
Enter is for immediate termination of entering numbers (not waiting for the time-out).
The other are used to correct bad input.
Pako

EventGhost

how do I add a macros with 2 digits such as, 11 or 13?

how do I add a macros with 2 digits such as, 11 or 13?

Re: how do I add a macros with 2 digits such as, 11 or 13?

Re: how do I add a macros with 2 digits such as, 11 or 13?

Re: how do I add a macros with 2 digits such as, 11 or 13?

Re: how do I add a macros with 2 digits such as, 11 or 13?

Re: how do I add a macros with 2 digits such as, 11 or 13?

Re: how do I add a macros with 2 digits such as, 11 or 13?

Re: how do I add a macros with 2 digits such as, 11 or 13?

Re: how do I add a macros with 2 digits such as, 11 or 13?

Re: how do I add a macros with 2 digits such as, 11 or 13?